Operation Manual Of Remote Control Flail Mower (MTSK1000 With Flail Mower)

Hi there! Welcome to our tutorial on how to use our awesome remote control flail mower.
In this video, we’ll cover everything you need to get started. Let’s dive in!

First things first, the machine has consumed some power due to long-term transportation. Charge it first.
The machine has two charging ports, one of which is specifically for charging the starting battery.

After charging is complete, add gasoline and oil to the machine.
Add oil from these two locations.
This is the oil scale, make sure the oil level is between these two points.
This is where the gasoline is added.

To ensure safety, please check that all blades are properly secured before starting the machine. Do not stand in front of the machine when the engine is started.

Now we can use the machine

First, turn on the storage switch. During transportation, we will turn it off to reduce battery loss.
Then check the emergency stop button and turn it to the open position according to the arrow.
There is also an emergency stop button on the remote control. Also, check if it is already in open position.

To get started, turn on the power switch on the machine.
Then turn on the power switch on the remote control.

Let’s move this baby around now. Using the remote control, you can go forward, backward, left, and right with ease. It’s super simple!

This lever controls the speed of the machine. You can switch between high and low speed depending on your mowing needs.

Use this lever to set the cruise control.
This feature is ideal for mowing large areas and reduces the need to operate the machine frequently.

The feed inlet opens and closes remotely with this lever, ideal for cutting tough shrubs and vines.
Use this lever to adjust the mowing height. It makes it easy to customize your mowing experience.

Now, let’s start the engine.

First, before starting the engine, adjust the throttle to the minimum position.
then turn on this lever on the remote control.
Open the engine hood. and pull out throttle on the engine.
Now, use this lever to start the engine.
Push it back after the engine starts. Don’t forget to close engine hood.

The throttle adjustment can be controlled by the remote control.
After starting, turn up the throttle.
This function is quite helpful. When cutting thick grass, you can increase the throttle to boost the engine output, allowing for more effective cutting over distance.

To stop the engine, turn down the throttle and then move the lever down. It will take a few seconds for the engine to stop, don’t worry.

Finally, to turn off the machine, switch off the power button on the machine itself,
If you do not use the machine for a long time, please turn off the storage switch.
Turn off the power switch on the remote control.
And that’s it!
You’re now ready to go out there and mow your lawn with ease.

Thanks for watching, and don’t hesitate to reach out if you have any questions!